Energy Recovery

CanFab has a full line of energy recovery units which have been designed specifically to reduce the energy required to pre-cool or pre-heat the outdoor air by as much as 80%. Energy recovery units allow the packaged roof top air conditioning system or air handler system to effectively and economically accommodate the 300% to 400% increases in outdoor air quantities recommended by ASHRAE Standard 62-1999 Table 2, Ventilation for Acceptable Indoor Air Quality. This state-of-the-art design allows both new and existing buildings to achieve energy conservation while ventilating for heath and comfort. CanFab energy recovery is designed to improve humidity control when combined with packaged rooftop equipment or an air handler. Because the energy recovery preconditions the incoming air to the air conditioning system, the required cooling capacity can be reduced by as much as 50%. Thus, the costs of the energy recovery system and its installation are typically offset by the reduced size of the rooftop unit or air handler and associated duct system. In most projects, any first cost premium is paid back within the first year of operation while additional annual energy savings become an annuity.

The Air Conditioning and Refrigeration Institute, ARI, is an association of at least 90% of the manufacturers involved in the HVAC & R industry. ARI establishes equipment standards for performance and administers certification programs to ensure compliance to those standards. By providing equipment bearing the ARI seal, the end user is assured of repeatable performance from a creditable and reliable manufacturer.

PERFORMANCE

ERAM

STANDALONE

COMBO SYSTEM

With CanFab you decide which patented energy recovery cassettes best meets your needs. Both Silica Gel Polymer or Molecular Sieve Synthetic Fibrous Wheels are offered. Both energy recovery cassettes are an ARI and UL recognized component. Other energy recovery unit components include ANSI rated blowers, UL and NEMA listed High Efficiency motors. When combined in an ETL Tested and Listed module or stand alone unit, you have certification support for your engineering, manufacturing, sales, and marketing effort.

 
Privacy Policy ©2013 Cannon Fabrication, Inc. All Rights Reserved.
182 Granite Street, Corona, CA 92879
USA Flag
800-232-2632